Product includes:
Battery × 1, fan × 2, AC adapter × 1, charger × 1, user manual/warranty card × 1
Product specifications (Model: TGL-05)
|
Code |
TGL-05 |
Weight |
~ 270g |
|
Rated capacity |
3.7V/12000 |
Charging AC adapter |
~ 6h |
|
Rated input |
5V 3.0A |
Pressure temperature use |
0 °C～+55 °C |
|
Charging port |
5V USB 5V /2.1A TypeC< /span> 5V/3.0A |
Storage temperature |
-10 °C～+45 °C |
|
Size |
126*68*23mm |
Number of charges |
about 800 times |
Charger parameters
|
Input Output |
100～240V 50/60Hz 5V - 3.0A |
Things to note
o If the lithium battery is not used for a long time, the phenomenon of natural discharge will cause battery to decrease. To maintain battery life, charge every 3 months.
The Orbot lithium battery charger is the best fit.
o Specifications may change during product improvement.
o Battery voltage and capacity may vary
Introduction and use of lithium batteries
Precautions for using battery safety
To prevent fire, electric shock and other accidents, please follow the following safety precautions Before use, please read "Safety Precautions" and follow the instructions.
During use, pay attention to the dangers, warnings and precautions. Here is what these terms mean: DANGER : Improper use may result in death or serious injury. Pay special attention.
WARNING: Improper use may result in death or serious injury. Take special care.
< strong>Note: Misuse may cause product damage. Pay special attention.
Please read carefully and follow exactly what is written. Safety is of the utmost importance and must be strictly followed. span>
The signs "DANGER", "WARNING" and "CAUTION" are important during product manufacture, operation and maintenance. After reading, please read the operating instructions in easy reach If you lend this product to someone else, please provide the user manual that came with the product.
Danger:
1. Air transport move lithium batteries together with metal objects. This may cause the battery to short circuit, overheat, catch fire or explode.
2. Do not use batteries produced by unofficial manufacturers or chargers that have not been PSE certified.
3. If a problem or accident occurs, please cut off the power immediately. If the battery is abnormally hot, cut off the power immediately.< /span>
4. Please do not disassemble it yourself, repair or modify the battery. This may affect the performance and safety of the battery.
yle="font-size:14px;">5. Do not allow the battery terminals to come into contact with metal objects.
6. Do not throw a used battery into a fire. The battery may explode.
7. Do not charge, use or store the battery in a place exposed to fire or high temperature.
8. There is a risk of heat, fire or rupture.
9. Partial deformation of the battery may cause malfunction.
Warning:
1. When the internal temperature of the lithium battery exceeds 55°C. C, do not use this product. It may cause heat generation, fire or rupture.
2. After reading the instruction manual, please use the battery correctly. Please note the risk of electric shock.
3. Do not touch the charger with wet hands. Pay attention to the humidity of the usage environment. Do not use the charger on rainy days or in high humidity environments.
4. Do not use the charger in places with flammable liquids or gases.
5. If there is any abnormality with the charger, please cut off the power immediately.
6. Do not use the battery while charging. It may cause adverse effects on the battery.
7. Do not abuse the battery. It may shorten the battery life.
8. For general household waste, please dispose of the battery according to local regulations. Careless disposal of the battery may cause fire.
9. During use, charging or storage of the battery, if there is any abnormality such as odor, heat, discoloration or deformation, please stop using it immediately.
10. If the battery leaks, emits a strange odor or is deformed, please move it away from the fire source immediately. Leakage may cause fire or damage to the battery.
11. Keep out of reach of children. May cause an accident.
Caution:
1. When using the battery, make sure that it is properly inserted into the device and that the device's power is turned off. Otherwise, the battery power may be lost.
2. When installing the battery, make sure that the positive and negative poles of the battery match correctly. Failure to do so may cause malfunction or damage.
3. Before use, please confirm that the battery is properly installed in the device. If any abnormality is found, do not use it.
4. If the battery leakage comes into contact with skin or clothing, please wash it with clean water immediately. If not treated promptly, it can lead to problems such as dermatitis.
Fan Specifications & Usage Time
|
风扇 |
型号 |
TGL-05 |
||
|
功率 |
5V |
|||
|
转速 |
5V5000 转 |
|||
|
重量 |
185g（2 个） |
|||
|
工作电压 |
1 档位/3V |
2 档位/4V |
3 档位/5V |
|
|
连续运行时间 |
10-12H |
|||
1. Time Battery operating time is measured under laboratory conditions. Actual usage time may vary due to differences in working environment, usage status and battery charging time.
2. You must use Orbot brand batteries.
3. Our company is not responsible for any accidents such as operational errors or battery loss when used in combination with other companies' products.
Fan installation instructions
1. Turn the fan guard counterclockwise and remove it.
2. Connect the fan body to the dedicated fan hole on the front of the garment, to make connecting the power cord easier. Please adjust the fan power cord facing down.
3. Fix the inside of the device parallel to the fan shield.
When attaching the fan shield, make sure it is parallel to the fan body. Please note that if not securely fixed, the device may fall.
4. Connect the red wire to the high-speed fan on the left and the black wire to the high-speed fan on the right.
When removing the fan from the work clothes, do not pull the fan directly to avoid disconnection connection. Hold the fan and remove it.
5. Show diagram of fan installation on clothes.
Troubleshooting when the fan has problems
If a problem occurs, please check as follows.
Charge the battery.
| Error | Problem | Fix |
| Fan not spinning | The fan plug (red) is not plugged into the battery. | Insert the fan plug (red) into the battery. |
| The fan connector (black) is not connected to the battery. | Insert the fan plug (black) into the battery | |
| Battery is low. | ||
| Battery switch not turned on. | Press and hold the battery switch for 3 seconds to restart. |
There will be a sound when starting and stopping. If the fault cannot be confirmed, please contact our dealer. This product cannot be disassembled or repaired by yourself. cure.
Safety precautions when using fans
Before use, read and follow the instructions in the "Safety Precautions" section.
Warning: Improper use can result in death or serious injury for users.
Caution: Improper use may result in personal injury or product damage.
After reading, keep the instruction manual in a visible place. If you lend this product to others, please provide the instruction manual with the product.
Please keep the instructions for use properly.
|
Warning |
|
1. Do not put your fingers on the fan. Especially when children are around, be careful not to let them put their fingers in the fan to avoid danger.
2. If the fan reaches an abnormally high temperature, stop using it immediately |
|
Note |
|
1. Do not clean the fan or expose the fan to rain or water. If the fan is used in a wet state, it may cause malfunction. 2. Do not use a hair dryer to clean the fan. This may cause the fan blades to deform or become damaged. 3. Do not operate the fan roughly. This may result in broken wires or fan damage. 4. If the fan cannot operate normally, do not force the fan to start to avoid burning the motor or damaging the fan. 5. If the battery cover is loose, stop using it immediately and fix the battery cover. Do not press hard. Failure to do so may cause malfunction or damage. 6. Do not use in dusty environments. If the fan draws in dust, it may cause damage. 7. Do not apply unreasonable external force to the fan. Failure to do so may cause damage. 8. When using, do not block the fan's air intake, otherwise the fan may be damaged. |
If you lend this product to someone else, please also lend the user manual. Warranty conditions:
1. Warranty service will be provided if the defect is caused by a manufacturing defect.
2. If the operating instructions are inconsistent with the warning label on the product itself, the resulting defect will not be covered by the warranty.
3. If you have any questions about the quality of this product, please contact the seller.
TGL IMPORT EXPORT TRADING COMPANY LIMITED
Specializing in providing and exporting nitrogen freezing equipment, compressors, and industrial air conditioners.
Address: 633 Kinh Duong Vuong, An Lac Ward, Binh Tan District
Tel: 0939 545 088
Email: tglcoltd86@gmail.com
Website: maycapdong.com
